• Name of the software: MR-Configurator V1.70Y

• Feature:

+ Test Servo, Jog Mode, Test Mode

+ Monitor running parameters with Monitor Mode

+ Copy, read/write, upload/download parameter Servo

+ Can be installed on most operating systems: Windows 95, Windows 98, Windows-XP, Windows 7, Windows Vista, Windows 8/8.1, Windows 10,…

+ Can be connected via RS242 / 485 Cable or USB

+ The software supports models: J3 / J4 / JE / JN

• >>> Link Download Software (GoogleDrive- Easy for Download):

+ Download MR-Configurator2 V1.70.RAR (Password: plc4me.com)

Thanks for reading!

The post [Download] MR-Configurator2 V1.70 (GoogleDrive) appeared first on plc4me.com.

Drive start tools (DriveMonitor; SIMOCOM U / A, Starter) are full of components in Drive ES Basic, thus allowing users to solve the drives at the same time as Siemens automation techniques. The management data of both automatic and technical transmission are compatible with each other. That ensures the normal data storage.

• Function of the software:

+ Handling list of drive parameters

+ Download,upload and compare the settings

+ The basic logic functions the start instruction

+ Technical functions for start-up instructions

+ Diagnostics such as fault and alarm memory, PROFIBUS diagnostics, monitoring of monitoring and evaluation.

+ Export / import settings

+ Extend the help function depending on the context

+ Actuators are configured the same as controller programming

• Instructions for installing software by video (Link software at the bottom of the article)

• Installation instructions by image:

+ Step 1: Download the software and extract it

+ 2: Run the file setup.exe

+ 3: Choose Setup Language

+ 4: Click Next to continue

+ 5: Accept License Agreements then Next

+ 6: Check information then Next

+ 7: Enter user information

+ 8: Select the software you want to install

+ 9: Wait for the installation process to take a few minutes

+ 10: Restart your computer when the installation process is finished

Open the software and work with it

>>> Link Download Software ( Link GoogleDrive – Fast for Download ):

+ Download Simatic_DriveMonitor_V5.5_SP2 + HF1 Software.RAR

Password Extract: plc4me.com

Thanks for reading !

The post [Download] Simatic_DriveMonitor_V5.5_SP2 + HF1 appeared first on plc4me.com.

MEXE02 supports the following models :

+ AR-Series, ARL-Series, AZ-Series

+ BLE-Series, BLE2-Series, BLH-Series, BLV-Series

+ BX2-Series, CRK-Series, DRL2-Series, NETC-Series

+ NX-Series, PKA-Series, RK2-Series

• Software installation video (Link to download the software at the end of the article)

• Installation instructions by image

+ Step1 : Extract the software after downloading

+ Step2 : Select Install to install Driver Cable for the software

+ 3 : Click Next to continue the installation

+ 4 : Choose I accept the terms in the license agreement then Next

+ 5 : Enter Customer Information

+ 6 : Choose to install the Full version

+ 7 : Select Install to start the software installation

+ 8 : Wait a moment

Ok Done and Enjoy

>>> Link Download Software ( GoogleDrive – Easy for Download )

+ Download MEXE02 Oriental Software.RAR

Thanks for views !

The post [Download] MEXE02 Oriental Motor Configurator Software appeared first on plc4me.com.

Although GX-Works.3 software has integrated this software! But today I share so that you want to use only software MR-Configurator.2

• Installation video tutorial (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : Firstly ! You download the software and extract it

+2 : We need to install the previous version of MR-Configurator2 V1.10L

+3 : Click on “setup.exe’ then OK

+4 : In this step, select Next

+5 : At this step we need to enter Key

+6 : Go back to the unzipped folder, open the “Key Setup.txt” file and copy Key

+7 : Proceed to enter Key and user information

+8 : Choose Destination Location then NEXT

+9 : Next Continue

+10 : Select “Yes” to added shortcut to the desktop

+11 : Select “Finish” to finish the installation of the V1.10L version

+12 : Go back to the unzipped folder and open the MRC2-1.41T folder

+13 : Click “setup.exe” then Next

+14 : The Update will start running the version upgrade from V1.10L >>> V1.41T

+15 : The upgrade process finishes selecting “Finish”.

The installation process was successful

>>> Link Download Software (Google Drive) :

+ Download MR-Configurator2 Mitsubishi Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download]MR-Configurator.2 “J3/J4/JE Mitsubishi Servo” Software (Real 100) appeared first on plc4me.com.

• Installation video tutorial (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : You unzip the downloaded file

+ 2 : Open folder Disk1

+ 3 : Click on file “Setup.exe” then Next

+ 4 : Enter your information then Next

+ 5 : Select folder where Setup will install files then Next

+ 6 : The installer will run very fast, please wait a moment

+ 7 : When the installation process finishes, click Finish

Open the software and work!

>>> Link Download Software (Google Drive) :

+ Download MR-Configurator Mitsubishi Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download]MR-Configurator “J2/J2S Mitsubishi Servo” Software (Real 100%) appeared first on plc4me.com.

LEC-W2 software supports most of its RoboCylinder types

• Installation video tutorial (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : You unzip the downloaded file

+ 2 : Click on Folder ACT Controller

+ 3 : Choose Software Language

+ 4 : Click on the “setup” .exe file and then select Next

+ 5 : Select Installation Folder then Next

+ 6 : Confirm Installation then Next

+ 7 : Waiting some second ^^

+ 8 : Click “Close” to complete the installation process

Software includes “Easy Mode” and “Normal Mode” modes

>>> Link Download Software (Google Drive) :

+ Download LEC-W2 SMC Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] LEC-W2 “SMC RoboCylinder” Software (Real 100%) appeared first on plc4me.com.

+ Sigma-7 , Sigma-V , Sigma-III , Sigma-II , Sigma-I , Sigma-L…

Yaskawa is a company that has been around for over 100 years. Its Servo motor is very cheap but extremely high quality, beautiful design and compact, durability is also very long!

• Installation video tutorial (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : You unzip the downloaded file

+ 2 : To run SigmaWinPlus software, we must install Microsoft NET.Framework 4.62 or higher. Click “NDP462 …” exe to Install

+ 3 : Click on “SigmaWinPlus7 Installer.exe” then Run

+ 4 : Click “Next”

+ 5 : Select “I accept the terms in license agreement” and select Next

+ 6 : Choose Destination Location

+ 7 : Select “Install” to begin the process of installing SigmaWinPlus software

+ 8 : Wait for a few minutes

+ 9 : Click Finish to finish the installation process

+ 10 : You open the software on the desktop

+ 11 : At the first start-up the software will need to initialize in minutes! Please wait patiently ^^

The initialization process is complete and we now work with the software

>>> Link Download Software (Google Drive with ads) :

+ Download SigmaWin-Plus7 Yaskawa Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] SigmaWinPlus-V7.28 “Yaskawa Servo Software”(Real 100%) appeared first on plc4me.com.

• Recommended configuration :

+ CPU : 800 MHz >>>

+ Memory : System memory of 512MB or more
Graphics memory of 32MB or more

+ Hard disk : 512MB >>>

+ Operating system support : Win-7 (64bit), Win-8 (64bit) , Win-10 (64bit)

• Video tutorial to install software (Download link at the end of the article) :

• You can also see the image tutorial here :

+ Step 1 : Extract the installation file you just downloaded

+ 2 : Click on the “setup.exe” file and select the installation language and click OK

+ 3 : Select Next on this step

+ 4 : Select “I accept the terms in license agreement” and click Next

+ 5 : Enter the user information and select Next

+ 6 : Select the installation directory in this step

+ 7 : Click “Install” to start the software installation process

+ 8 : After the installation process ends! Select Finish

And now we have the latest Panaterm software ^^

>>> Link Download Software (Google Drive with ads) :

+ Download Panaterm V6 Panasonic Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] PanaTerm-V6 “A5,A6-Series” Panasonic Servo Software (Real 100%) appeared first on plc4me.com.

PanaTerm V3.7 is a software used to configure its older Servo series including :

+ A3-Series , A4-Series , E-Series , B-Series , S-Series , A-Series

• Installation video tutorial (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : You unzip the downloaded file

+ 2 : If your computer uses Windows-XP, click “SetupXP.exe”

If running Windows 7, 10, and Vista, select “setup.exe”

+ 3 : Select OK in this step

+ 4 : Select the archive folder Setup then Click “Start Installing”

+ 5 : Choose Continue

+ 6 : Select “Next” to continue

+ 7 : Waiting for the installation process to take place very quickly

+ 8 : Select OK to finish the installation process

Open the software and work with it

>>> Link Download Software (Google Drive with ads) :

+ Download Panaterm V3.7 Panasonic Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] PanaTerm-V3.7 “A3,A4,E-Series” Panasonic Servo Software (Real 100%) appeared first on plc4me.com.