That’s why plc4me.com will guide you to install the software to display these Models with EasyBuilder Pro version V6.08.02.500

HMI models that the software supports:

Installation Instructions

+ Go to “Clock and Region”

+ Select “Region”

+ Choose “Administrative”

+ Choose “Chinese(Simplified, China)

+ Reset your PC >>> Done

>>> Setup EasyBuilder Pro V6.08.02.500 to finished.

Software Download Link (GoogleDrive)

>>> Download EasyBuilder Pro China Version

Password Extract: plc4me.com

Thanks for reading!

The post [Download] EasyBuilder Pro China Version (TK6071iP….) appeared first on plc4me.com.

This software supports all of Weintek’s HMI models, but if you want to work with Chinese-specific HMIs such as TK-6070 / 71iP then you need to change the computer language as well as the language. The software follows the instructions below:

+ Step1: Go to Control Panel

+ Step2: Select Clock and Region

+ Step3: Chose Change location

+ Step4: Select Change system … as shown below

+ Step5: You select Chinese (Simpified, China) and then restart the computer

+ Step6: Proceed to install the software and also select the Chinese language as shown below

After installing the software, we can work with HMI TK-6071iP

• Instructions for installing software with Video

>>> Link Download Software (GoogleDrive – Fast for download )

+ Download TK-6071iP Software for Windows10,8,7

Thanks for views!

The post [Download] TK-6071iP Software for Windows10,8,7 (GoogleDrive) appeared first on plc4me.com.

WinProladder has an extensive command library such as Siemens, Mitsubishi, Omron but also basically meets user needs, a great advantage is its extremely light capacity, only 3.5Mb. You will often see Fatek PLC in punching machines, stamping machines, weaving lines … originating from China, Taiwan

• Video tutorial for installing software (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : Download the software and proceed to extract the software

+2 : Click on file “[plc4me.com]WinProladder-V3.27.exe” then Next

+3 : Select “Destination Location” then Next

+4 : Select “Start Menu Folder” then Next

+5 : Select “Additional Tasks” then Next

+6 : Select “Install” to start the software installation process

+7 : The installer will start running and finish in a few seconds

>>> Our achievements

>>> Link Download Software (Google Drive) :

+ Download Win-ProLadder Fatek Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] Win-ProLadder V3.27 “Fatek” PLC Software (Real 100%) appeared first on plc4me.com.

Kinco bought technology from Omron so you will not see any difference in interface between HMIWare V2.2 and Omron HMI programming software is NB-Designer – both in hardware and software ^^! But its advantages are cheaper

• Video tutorial for installing software (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : Download the software and proceed to extract the software

+2 : Select Install language and click Next

+3 : Choose “Next”

+4 : Select the software installation directory

+5 : Click “Install to start installing software”

+6 : Wait for the installation process to take place in a few minutes

>>> Installation process completed !

>>> Link Download Software (Google Drive) :

+ Download HMI-Ware Kince Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] HMI-Ware V2.2 Kinco HMI Software (Real 100%) appeared first on plc4me.com.

• Video tutorial for installing software (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : Download the software and proceed to extract the software

+2 : Click on file “setup.exe” then Next

+3 : Select “I accept the agreement” then Next

+4 : Enter user information

+5 : Select Destination Location then Next

+6 : Choose where to store the program

+7 : Click Install to begin the software installation process

+8 : Wait a moment

+9 : After installation is complete, select Finish

>>> Open the software and work with it

>>> Link Download Software (Google Drive) :

+ Download OP-20 Edit Tool OP320/25 Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] OP_20 Edit Tool “OP320/325 (Xinje) HMI” Software (Real 100%) appeared first on plc4me.com.

However, if you only run universal applications, Samkoon HMI is a very good solution because the price is very low, the durability is 3-5 years or more. HMI Vietnam specializes in distributing SamKoon HMI and repair service for replacement of touch panel components, LCD for SamKoon HMI from 4.3 inch to 7 inch, 10 inch, 12.1 inch …

SKWorkshop software for SK Series series

• Video tutorial for installing software (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : First, download the software in the article and then extract it

+2 : Click on file Setup then “Next”

+3 : Choose “I accept the agreement” then “Next”

+4 : Select Destination Location then “Next”

+5 : Creat a desktop icon

+6 : Select Install to start the software installation process

+7 : Wait for the installation process to take place in a few minutes

+8 : End the software installation process

And we successfully installed the software, now work with SamKoon HMI

>>> Link Download Software (Google Drive with ads) :

+ Download SK-Workshop Samkoon Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] SK-Workshop Samkoon HMI Software (Real 100%) appeared first on plc4me.com.

Professional programming software for the HMI Weintek touch screen products line of eMT3000 / IE / mTV / cMT / XE / iER / 1iP series

• Installation video tutorial (Download link at the end of the article) :

• Installation instructions for images :

+ Step 1 : Extract the downloaded file

+ Step 2 : Click on file EBProV.6 , select language then OK

+ Step 3 : Click Next

+ Step 4 : Choose Agree

+ Step 5 : Next

+ Step 6 : Choose Yes

+ Step 7 : Choose Agree

+ Step 8 : Click “Install” to start the installation process

+ Step 9 : Waiting for the installation process to take place

OK ! The installation process was successful !

>>> Link Download Software (Google Drive with ads) :

+ Download EasyGuilder-Pro Weintek Software.RAR

If there are any problems during the installation process please comment below the post

Thanks for visiting website ^^

The post [Download] “EasyGuilder-Pro” HMI WEINTEK Software (Real 100%) appeared first on plc4me.com.